The identification of the suitable consumable for a certain instrument is especially in headspace extremely difficult. The compatibility chart will help you to
Our headspace vials are produced under the most stringent conditions with highly sophisticated production technology out of 1st hydrolytic class glass.
Home · WHEATON® µL MicroLiter® 20mm Headspace Vial, Crimp Seal, Headspace Vials, 20 mL, Beveled Crimp, Clear, Non-Silanized, Class 10,000 Clean Room Packed,
The flat-bottomed small sample vials are suitable for downward movement when the instrument is running. The headspace vials have a large contact area with
The 12 mL gas sample from the syringe is injected into the 10 mL headspace vials. We typically collect 8 samples from each chamber. At a minimum
10mL crimp style headspace vials for the HS-10, HS-20, AOC-5000, and AOC-6000. Requires magnetic cap for use with the AOC-5000 or AOC-6000.
Type 1 borosilicate glass · Clear glass vials with 20mm crimp seal finish are designed to fit most headspace autosamplers · Flat bottom vials maximize heating
Dec 31, 2019 This is referring to the screw-thread caps (18 mm) and crimp caps (20 mm) for 20 mL headspace vials. We don't just recommend screw cap headspace ...
Feb 29, 2012 Vial heating is one of the most important aspects of a headspace sampler. Early samplers used water or even oil baths for consistent results, ...
Headspace vials and caps are used in headspace gas chromatography analysis because of their ability to withstand the pressure from gas.
When performing quantitative headspace GC analysis it is not recommended that more then one injection be made from a vial. This is especially important when
The GERSTEL DHS uses standard 10 and 20 mL headspace vials for the sample. The sample vials are loaded into an appropriate tray on the MPS rail.
If we were to examine the composition of the headspace vapor from a complex liquid sample that has been sealed and thermally equilibrated inside a suitable vial
These headspace vials are made to withstand higher temperatures and internal pressures required for volatile gas analyses. They have very low metal content,
Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 8mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 9mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 10mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1pack